When using a fully charged flashlight, it is best to use the second gear first, pay attention to heat dissipation, if you do not use the flashlight for a long time, please take out the battery and other related knowledge.
Flashlights need to be regularly inspected and tested. If they are found to be inoperable, they need to be repaired and disposed of in time. In the normal use state, you should pay attention to the instructions for using the flashlight.
- When the battery is strongly required to be fully charged, it is best to use the second gear first, so that the lamp holder and battery of the flashlight can be extended to extend the life of the product! Holding the flashlight by hand is a better way to dissipate the heat. It is recommended to dissipate heat or turn off according to the heat of the flashlight when it is lit. After the temperature is lowered, it will be lit again to dissipate heat. For the flashlight, it is waterproof, shockproof, etc. Strengthen the protection; keep the inner wall of the lamp cup clean, never wipe it with your hand or a hard object; remove the fingerprint on the lens, use a cotton swab and a lens cleaner to gently wipe the test; do not put the light flashlight directly into the human eye, super Bright and glaring, so as not to affect vision, especially children; if you do not use the flashlight for a long time, please take out the battery (one month or longer) to avoid chemical corrosion.
- The explosion-proof flashlight from the industry level development, industrial upgrading, technology improvement, market competition, the careful development of the development of the glare flashlight market. The types and types of glare LED flashlights are gradually increasing. At present, there are more than 40 high-quality series, which makes the market of strong photocells more and larger, and it is getting more and more attention. Preventing the purchase of fake or defective glare flashlights, simple and practical, and easy to carry, are suitable for household essentials, some experts remind consumers, household LED flashlights to be prepared for a long time, can not be missed, and sent at key moments Use the field to reduce losses and enhance self-protection awareness. Each diode is connected to the circuit board by soldering. If there is a bad solder joint, it may cause the bead to be off or affect the overall use. When using a flashlight, you need to know the flashlight, so that we can use it better and use the flashlight for a longer time.
- The attack head can also come in handy, just as law enforcement can also play the role of a flashlight. The flashlights are all equipped with 3W as standard. The single lamp 3W is still the best CREE LED with stable performance. The brightness can be used to meet the design requirements. In addition, the light cup is also very important. If the quality is good, the LED flashlight can ensure the illumination distance, and the surface layer is not easy to fall.
- While maintaining the flashlight, if the flashlight is not used for a long time, it is recommended to charge the battery for 3 months. Good for battery protection and glare flashlight life. I also hope that the flashlight can create a comfortable working environment for everyone, a warm place.